- Silicon Laboratories, Inc. Radio User Manual

Rev. 1.0 11/05 Copyright © 2005 by Silicon Laboratories USB FM Radio-RD
USB FM Radio-RD
USB FM RADIO USERS GUID
E
1. USB FM Radio Setup
Follow the instructions listed below to set up and configure the USB FM Radio.
1. Download the USB FM Radio Player from the Silicon Laboratories website at www.silabs.com/usbradio.
2. Connect the USB FM Radio to an available USB Port on the PC.
3. Run the USB FM Radio Player.
4. The first time the Radio is connected, the USB FM Radio Setup Wizard shown in Figure 1 will appear.
5. Enter the correct location to specify the region-specific FM band.
6. Optionally, enter local radio station frequencies as Presets for the USB Radio player.
7. Press the Done button to configure the USB FM Radio Player.
8. The USB FM Radio Player will now connect to the USB FM Radio and will tune to the default radio station.
9. If configured, press one of the Station Preset buttons. Otherwise, press the Seek button to find a local radio
station.
Figure 1. Initial USB FM Radio Player Setup
One-time set-up enables
configuration of presets and
region specific FM band

Summary of content (4 pages)