Specifications

AN93
Rev. 0.9 41
+VCDT = n
Caller ID Type.
n
Mode
0 = After ring only (Bellcore)
1 = Always on (Bellcore)
2=UK
3 = Japan
+VCID = n
Caller ID Enable.
n
0 = Off
1 = Formatted caller ID enabled.
2 = Raw data caller ID enabled.
+VCIDR?
Type II caller ID information—”+VCIDR:” will be followed by raw caller ID information including
checksum. “No Data” will be displayed if no Type II data is available.
Table 18. Basic AT Command Set (Continued)
Command Action