User`s guide

Si47xx-EVB

Rev. 0.8 53

Figure 45. RDS Transmit Window

Table 13. RDS Transmit Window Descriptions

Item Description

General

RDS/RBDS Selection

Select either RDS format (Europe) or RBDS format (US).

Program Type (PTY)

Select the available Program Type (PTY) from the pulldown menu.

PTY Dynamic

Select whether the PTY will be dynamic or static.

Enter Program Identification (PI) code here.

Program Service

Program Service Messages

Enter up to 12 different Program Service (PS) Messages. Each PS consists of a

maximum 8 characters. Messages are ordered left to right, top to bottom.

Load Msgs

Load the PS messages into the device.

Repeat Count

Enter how many time each PS will be repeated before sending the next PS.

Message Count

Enter how many messages of the loaded PS that will be transmitted.

Mix

Select the mix percentage between transmitting the Program Service or Buffers.

Alternate Frequency

Part of RDS Group Type 0 (PS): Enter Alternate Frequency if it is available.

Artificial Head

Part of RDS Group Type 0 (PS): Enter whether Artificial Head is On or Off.