User`s guide

Si5365/66-EVB

Si5367/68-EVB

Si5369-EVB

Rev. 0.5 13

7.4. Precision Clock EVB Software Installation

To install:

1. Navigate to the "PrecisionClockEVBSoftware" directory.

2. Double-click on the Setup.exe file

3. Follow the steps in the wizard to install the program. Note: Use the default installation location for best results.

4. After the installation is complete, click on Start

ProgramsSilicon LaboratoriesPrecision Clock EVB

Software. Select one of the programs to control the EVB.

5. Refer to the online help in each program by clicking Help

Help.

To uninstall:

1. Open Add/Remove Programs in the Control Panel.

2. Select the Precision Clock EVB Software, and click Remove.

3. Follow the steps in the wizard to complete the removal.

7.5. Precision Clock EVB Software Description

There are several programs to control the Precision Clock device. Each provides a different kind of access to the

device. Refer to the online help in each program by clicking Help

Help in the menu for more information on how

to use the software. Note: Some of the Precision Clock devices do not have a register map, so some programs

may not be applicable to them.

Table 8. User Applications

Program Description

The Register Viewer displays the current register map data in a table format sorted by reg-

ister address to provide an overview of the device’s state. This program can save and print

the register map.

The Register Programmer provides low-level register control of the device. Single and

batch operations are provided to read from and write to the device. Register map files can

be saved and opened in the batch mode.

Setting Utility

This application allows for quick access to each control on the Precision Clock device

(either pin- or register-based). It can save and open text files as well.

DSPLLsim

The DSPLLsim provides high-level control of the Precision Clock device. It has the fre-

quency planning wizard as well as control of the pins and registers in a organized, intuitive

manner.