User guide

FMC XM104 Connectivity Card User Guide www.xilinx.com 13

UG536 (v1.1) September 24, 2010

Board Technical Description

1. VITA 57.1 FMC HPC Connector J1

This connector interfaces to the board containing the Xilinx FPGA and mating FMC

connector. The XM104 uses Samtec FMC HPC connector part number ASP-134488-01. The

XM104 connector mates with an FMC connector.

See Xilinx board user guides and schematics for a description of features provided by HPC

interfaces contained on the board, including power supply specifications, FPGA banking

connectivity, and FPGA pin assignments.

• For ML605 LPC and HPC interfaces, see UG534

ML605 Hardware User Guide

See the VITA57.1 Specification at www.vita.com/fmc.html

for additional information on

FMC.

2. Multi-Gigabit Transceiver Data Port 0

Board FPGA multi-gigabit transceiver Data Port 0 signals are wired to SMA connectors on

the XM104. Data Port 0 connections between the XM104 FMC HPC connector and four

SMA connectors are defined in Table 1-3.

3 Multi-Gigabit Transceiver Data Port 1

Board FPGA multi-gigabit transceiver Data Port 1 signals are wired to SMA connectors on

the XM104. Data Port 1 connections between the XM104 FMC HPC connector and four

SMA connectors are defined in Table 1-4.

Table 1-3: FPGA Multi-Gigabit Transceiver Data Port 0 Connectivity

FMC HPC Connector

J1 Pin

Signal Name SMA Connector

C6 DP0_M2C_P

(1)

C7 DP0_M2C_N

(1)

C2 DP0_C2M_P J5

C3 DP0_C2M_N J6

Notes:

1. AC coupled using a series 0.1 uF capacitor

Table 1-4: FPGA Multi-Gigabit Transceiver Data Port 1 Connectivity

FMC HPC Connector J1

Signal Name SMA Connector

A2 DP1_M2C_P

(1)

A3 DP1_M2C_N

(1)

A22 DP1_C2M_P J9

A23 DP1_C2M_N J10

Notes:

1. AC coupled using a series 0.1 uF capacitor