User guide

Figure 9.12. Navigating the IDE while Debugging
9.9 Running Blinky with an EFM32 Device
To create a project based on the Blinky example using the Zero Gecko starter kit:
1.
From the main Simplicity Studio window, click the [Software Examples] tile.
2. In the first [Project setup] page of the project creation wizard:
a. Select [Zero Gecko 3200 Starter Kit] in the [Kit] drop-down menu.
b. The wizard automatically selects the [EFM32ZG222F32] device in the [Part] drop-down menu.
c. Select the SDK in the [SDK] drop-down menu.
d. Click [Next].
3. Select the [STK3200_blinky] example from the list and click [Finish].
4. Click the project in the [Project Explorer] view and click the [Debug] button to build and download the code to the hardware.
5. Click the [Resume] button to start running the example. The LED should blink.
6. Press the [Disconnect] button to return to the [Development] perspective.
AN0822: Simplicity Studio™ User Guide
Simplicity IDE
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 29