User guide

3. Kit Manager
The [Kit Manager] is a tool used to control the supported starter and development kits. When connected to a kit, the tool displays infor-
mation about the kit and the MCU present on the kit.
Figure 3.1. Kit Manager
The [Update Kit] section
is used to update the kit firmware. Whenever a new firmware version is released, enter the location of the new
firmware image here and install the new firmware on the kit.
The [Debug Mode] drop-down menu controls the routing of the debug signals from the built-in J-Link debug adapter. The options are
as follows:
• MCU
• In
• Out
• Off
AN0822: Simplicity Studio™ User Guide
Kit Manager
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.2 | 6