Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.11 High-Frequency Crystal
- 4.12 Low Frequency Crystal Oscillator
- 4.13 Precision Low Frequency RC Oscillator (LFRCO)
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
4.16.1 Antenna Typical Characteristics
Typical BGM220S radiation patterns for the on-board chip antenna under optimal operating conditions are plotted in the figures that
follow. Antenna gain and radiation patterns have a strong dependence on the size and shape of the application PCB the module is
mounted on, as well as on the proximity of any mechanical design to the antenna.
Top Left: Phi 0
o
, Top Right: Phi 90
o
, Bottom Left: Theta 90
o
Figure 4.3. BGM220S12A Typical 2D Antenna Radiation Patterns on 50 mm x 30 mm board
BGM220S Wireless Gecko Bluetooth Module Data Sheet
Electrical Characteristics
silabs.com | Building a more connected world. Rev. 1.0 | 22