Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.11 High-Frequency Crystal
- 4.12 Low Frequency Crystal Oscillator
- 4.13 Precision Low Frequency RC Oscillator (LFRCO)
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
6.2 Alternate Function Table
A wide selection of alternate functionality is available for multiplexing to various pins. The following table shows what functions are
available on each device pin.
Table 6.2. GPIO Alternate Function Table
GPIO Alternate Functions
PB03 GPIO.EM4WU4
PB01 GPIO.EM4WU3
PB00 IADC0.VREFN
PA00 IADC0.VREFP
PA01 GPIO.SWCLK
PA02 GPIO.SWDIO
PA03
GPIO.SWV
GPIO.TDO
GPIO.TRACEDATA0
PA04
GPIO.TDI
GPIO.TRACECLK
PA05 GPIO.EM4WU0
PD02 GPIO.EM4WU9
PD01
LFXO.LFXTAL_I
LFXO.LF_EXTCLK
PD00 LFXO.LFXTAL_O
PC00
GPIO.EM4WU6
GPIO.THMSW_EN
PC05 GPIO.EM4WU7
6.3 Analog Peripheral Connectivity
Many analog resources are routable and can be connected to numerous GPIO's. The table below indicates which peripherals are avali-
able on each GPIO port. When a differential connection is being used Positive inputs are restricted to the EVEN pins and Negative
inputs are restricted to the ODD pins. When a single ended connection is being used positive input is avaliable on all pins. See the
device Reference Manual for more details on the ABUS and analog peripherals.
Table 6.3. ABUS Routing Table
Peripheral Signal PA PB PC PD
EVEN ODD EVEN ODD EVEN ODD EVEN ODD
IADC0 ANA_NEG Yes Yes Yes Yes Yes Yes Yes Yes
ANA_POS Yes Yes Yes Yes Yes Yes Yes Yes
BGM220S Wireless Gecko Bluetooth Module Data Sheet
Pin Definitions
silabs.com | Building a more connected world. Rev. 1.0 | 28