Data Sheet

16. Certifications
This section details the regulatory certification status of the module in various regions.
The address for the module manufacturer and certification applicant is:
SILICON LABORATORIES FINLAND OY
Alberga Business Park, Bertel Jungin aukio 3,
02600 Espoo, Finland
The BT122 modules have the brand name of “Silicon Labs”.
"Silicon Labs” is a trademark globally owned by the Silicon Laboratories Inc corporation, and consequently by the above branch acting
as the applicant.
16.1 EU and UK - CE and UKCA
The BT122 modules have been tested against the relevant harmonized/designated standards and are in conformity with the essential
requirements and other relevant requirements of the Radio Equipment Directive (RED) (2014/53/EU) and of the Radio Equipment Reg-
ulations (RER) (S.I. 2017/1206).
Please notice that every end-product integrating the BT122 module will need to perform the radio EMC tests on the whole assembly,
according to the ETSI 301 489-x relevant standard.
It is ultimately the responsibility of the manufacturer to ensure the compliance of the end-product as a whole. The specific product as-
sembly may have an impact to RF radiated characteristics, and manufacturers should carefully consider RF radiated testing with the
end-product assembly.
The modules are entitled to carry the CE and UKCA Marks, and a formal Declaration of Conformity (DoC) is available at the product
web page which is reachable starting from https://www.silabs.com/.
.
16.2 USA - FCC
This device complies with FCC's e-CFR Title 47, Part 15, Subpart C, Section 15.247 (and related relevant parts of the ANSI
C63.10.2013 standard) when operating with the embedded antenna.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.
Any changes or modifications not expressly approved by Silicon Labs could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specif-
ic operating instructions for satisfying RF exposure compliance.
This transmitter meets the Mobile requirements at a distance of 20 cm and above from the human body, in accordance to the limit(s)
exposed in the RF Exposure Analysis.
This transmitter also meets the Portable requirements at distances equal or above those listed for convenience in Table 16.1 Minimum
Separation Distances for SAR Evaluation Exemption on page 38.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
BT122 Data Sheet
Certifications
silabs.com | Building a more connected world. Rev. 0.6 | 34