Data Sheet
Table Of Contents
- 1. Features
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption at 3.0V
- 4.4 Radio Current Consumption at 3.0V
- 4.5 RF Transmitter General Characteristics
- 4.6 RF Receiver General Characteristics
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy at 1 Mbps
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy at 2 Mbps
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy at 500 kbps
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy at 125 kbps
- 4.11 High-Frequency Crystal
- 4.12 GPIO Pins
- 4.13 Microcontroller Peripherals
- 4.14 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
4.12 GPIO Pins
Unless otherwise indicated, typical conditions are: VDD = 3.0 V.
Table 4.12. GPIO Pins
Parameter Symbol Test Condition Min Typ Max Unit
Leakage current I
LEAK_IO
MODEx = DISABLED, VDD =
1.71V
— 1.9 — nA
MODEx = DISABLED, VDD = 3.0
V
— 2.5 — nA
MODEx = DISABLED, VDD = 3.8
V T
A
= 125 °C
— — 200 nA
Input low voltage
1
V
IL
Any GPIO pin — — 0.3 * VDD V
Input high voltage
1
V
IH
Any GPIO pin 0.7 * VDD — — V
Output low voltage V
OL
Sinking 20mA, VDD = 3.0 V — — 0.2 * VDD V
Sinking 8mA, VDD = 1.62 V — — 0.4 * VDD V
Output high voltage V
OH
Sourcing 20mA, VDD = 3.0 V 0.8 * VDD — — V
Sourcing 8mA, VDD = 1.62 V 0.6 * VDD — — V
GPIO rise time T
GPIO_RISE
VDD = 3.0V, C
load
= 50pF, SLEW-
RATE = 4, 10% to 90%
— 8.4 — ns
VDD = 1.7V, C
load
= 50pF, SLEW-
RATE = 4, 10% to 90%
— 13 — ns
GPIO fall time T
GPIO_FALL
VDD = 3.0V, C
load
= 50pF, SLEW-
RATE = 4, 90% to 10%
— 7.1 — ns
VDD = 1.7V, C
load
= 50pF, SLEW-
RATE = 4, 90% to 10%
— 11.9 — ns
Pull up/down resistance
2
R
PULL
pull-up: MODEn = DISABLE
DOUT=1, pull-down: MODEn =
WIREDORPULLDOWN DOUT =
0
35 44 55 kΩ
Maximum filtered glitch width T
GF
MODE = INPUT, DOUT = 1 — 26 — ns
Note:
1. GPIO and RESETn input thresholds are proportional to the VDD supply.
2. GPIO and RESETn pull-ups connect to the VDD supply. Pull-downs on GPIO connect to VSS.
BGM210P Blue Gecko Bluetooth Module Data Sheet
Electrical Specifications
silabs.com | Building a more connected world. Rev. 0.5 | 18