User's Guide

HAVwear Quick Start Guide
Contact Reactec support at [e-mail] Doc No. 290-198 v1
Page | 7
08
Hardware Verification
Power up and sign out HAVwear to verify the Docking Station is
operational.
• Connect 12V DC power supply to a mains power outlet then connect the power supply output
connector to the Docking Station.
• Dock the HAVwear Modules into the charging bays of the Docking Station, ensure that the green LED
on the charging bays illuminates to indicate that communication between the module and the
Docking Station is successful. Failure to communicate will result initially in a flashing red LED
followed by a continuous red LED being illuminated on the charging bay.
• Docked modules should be charged for an hour initially before sign out
• Connect the Ethernet RJ45 connector of the Docking Station to a Local Area Network which has a
DHCP server running using a Category 5 or higher ethernet cable (not supplied). Ports 21, 8021,
37729, 37730 and 7000-7099 are used by the Docking Station, network firewalls must be configured
appropriately for successful communication between the Reactec Cloud Server and the Docking
Station.
• When the Docking Station has communicated with the Reactec Cloud Server the date and time shall
be configured and displayed on the Docking Station.