User's Guide

SAFE-DISTANCE Quick Start Guide - USA
Contact Reactec support at [e-mail] Doc No. 290-197 v1
Page | 6
07
Program Operator ID Cards
Programming Operator ID Cards can only be carried out by a Group
Administrator or companywide Administrator.
Further support available
Card Programming Guide
Activity - Click here to watch the video on how to program operator ID cards.
Uploading the Operator ID Card Template
1. Select Data/Project Manager from the top toolbar
2. Select operators from the side menu
3. Select the Bulk Upload button
4. Select Browse, locate the saved template, then click Open
5. Select Import
6. Operators will now be visible in the Analytics Software Operator list
Program Operator ID Cards
1. Open Operator ID Card Manager Software.
2. Login using the Analytics Software account credentials.
3. Connect RFID Read/ Writer to the computer. A green tick will be displayed in the RFID Read/ Writer
Status box.
4. Click Write a Card
5. Place an Operator ID Card on the RFID card Read/ Writer.
6. A green tick will be displayed in the Card Status.
7. To upload the data to the card, press the appropriate Write button.
8. To program another Card, simply remove the previously programmed Card and place new one on the
RFID Read/Writer.
9. Select Close to exit the Software.