User's Manual
Table Of Contents
26
Impoant Safety Information
Read all safety information before installing this product.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to pa 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful inteerence in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inteerence to radio
communications. However, there is no guarantee that inteerence will not occur in a
paicular installation. If this equipment does cause harmful inteerence to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the inteerence by one or more of the following
measures:
WARNING: This device should be supervised when used around children.
WARNING: Do not put ngers into the electric vehicle connector.
WARNING: Do not use this product if the exible power cord is frayed, has broken
insulation, or shows any other signs of damage.
WARNING: For use with electric vehicles only.
WARNING: Do not use this device with an extension cord.
WARNING: Do not remove cover or aempt to open the enclosure. No user serviceable
pas inside. Refer servicing to qualied service personnel.
WARNING: Install and use away from ammable, explosive, harsh or combustible vapors,
materials or chemicals.
WARNING: Do not operate outside temperature rating of -40°C to +60°C.
WARNING: This device is intended only for electric vehicles not requiring ventilation
during charging.
WARNING: This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce the risk of
electric shock.
WARNING: Improper connection of the equipment-grounding conductor is able to
result in a risk of electric shock. Check with a qualied electrician or serviceman if you are
in doubt as to whether the product is properly grounded.