Technical Manual

TU600-X
Trackunit TU600-X, Technical Manual v1.0, December 2019 Page 29
Including:
Standard Version Description
ISO 13766-1, ISO 13766-2 2018 Earth-moving machinery and Construction
machinery
EN 13309 2010 Construction machinery
(Expire 2021-06-30)
EN/ISO 14982 2010 Agricultural and forestry machines
EN 12895, DIN EN 12895 2015
Industrial trucks - Electromagnetic
compatibility
(EN/IEC 62368-1 + AC/3, A11) 2014, 2015,
2017
Information and communication technology
equipment safety
EN/IEC 62133 {Ed2} 2012 Safety requirements for portable sealed
secondary cells, and for batteries made
from them.
Environmental compliance
The TU600-x are designed for compliance to the following environmental standards related to the
intended use of the product:
Standard Version Description
A, B
SAEJ1455:2012, EN/IEC 60068-2-1 2007 Cold
SAEJ1455:2012, EN/IEC 60068-2-2 2006 Dry Heat
SAEJ1455:2012, EN/IEC 60068-2-27 2010 Shock
SAEJ1455:2012, EN/IEC 60068-2-31 2008 Drop, free fall
SAEJ1455:2012, EN/IEC 60068-2-64 2008
Random vibration
SAEJ1455:2012, EN/IEC 60068-2-78 2001 Damp heat steady state
SAEJ1455:2012,
IEC 60529 + A1 + A2 (CSV) {Ed2.4} 2013
IP67 - Degrees of protection without
HW shield
IP69K & IP66K mounted inside HW
shield.
NOTE A: The TU600 is not to be mounted in areas with presence of Motor oil, Gasoline, Diesel fuel,
Hydraulic fluid, Brake fluid, Transmission fluid , Glycol and water mixture etc.
NOTE B: The housing not designed to withstand high pressure cleaning. Only use the TU600 when
mounted inside the designated Trackunit protection cap (Can be ordered at Trackunit A/S) in
mounting areas where high pressure cleaning is common procedure.