Data Sheet

12.5 Japan
The WFM200S modules are certified in Japan with certification number 006-000781
Since September 1, 2014 it is allowed (and highly recommended) that a manufacturer who integrates a radio module in their host
equipment places the certification mark and certification number on the outside of the host equipment (same marking/number might
also appear on the label of the radio module). The certification mark and certification number must be placed close to the text in the
Japanese language which is provided below. This change in the Radio Law has been made in order to enable users of the combination
of host and radio module to verify if they are actually using a radio device which is approved for use in Japan.
Certification Text to be Placed on the Outside Surface of the Host Equipment:
Translation of the text:
“This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification under
the Radio Law.”
The "Giteki" mark shown in the following figures must be affixed to an easily noticeable section of the specified radio equipment.
Note: Additional information may be required if the device is also subject to a telecom approval.
Figure 12.1. GITEKI Mark and ID
Figure 12.2. Detail of GITEKI Mark
WFM200S Data Sheet
Certifications
silabs.com | Building a more connected world. Preliminary Rev. 0.51 | 43