User's Guide
Table Of Contents
- 1. WFM200 Pinout
- 2. Device Configuration
- 3. Features Description
- 4. Power Supplies
- 5. Application Schematic Recommendations
- 6. Typical Application Schematics
- 7. Layout Recommendations
- 7.1 Generic RF Layout Considerations
- 7.2 GND and RF Pads Including the Diversity Port and External Antennas
- 7.3 Module Antenna
- 7.3.1 Small Board Size Recommendations for Good RF Performance
- 7.3.2 Extended X Dimension Recommendation for Good RF Performance
- 7.3.3 Y Dimension (65 to 80 mm) Recommendation for Good RF Performance
- 7.3.4 Y Dimension (80 mm or Larger) Recommendation for Good RF Performance
- 7.3.5 WFM200 Portion One Corner Bias with 3 mm Metal Keep-Outs
- 7.3.6 Recommended Antenna Loop Trace Capacitor Values
- 7.4 WFM200 Reference Evaluation Board
- 8. Recommendations for Certification
- 9. Package Outline
- 10. Integral Antenna Loop and Keep-Out Required Dimensions
- 11. Recommended PCB Land Pattern
Dimension MIN NOM MAX
Note:
1. All dimensions in millimeters (mms).
2. Unless otherwise specified tolerances are:
a. Decimal:
• X.X = ±0.1
• X.XX = ±0.05
• X.XXX = ±0.03
b. Angular: ±0.1 (In Deg)
3. Hatching lines means package shielding area.
4. Dimensioning and Tolerance per ANSI Y14.5M-1994.
UG395: WFM200 Hardware Design User's Guide
Package Outline
silabs.com | Building a more connected world. Preliminary Rev. 0.1 | 32