Instruction manual
Table Of Contents
- Additional Tools and Software
- Using the Command Line Configuration Utility (hdhomerun_config)
- Supported Commands
- HTTP Streaming (TECH3-6CC-3x2 only)
- Lineup file (TECH3-6CC-3x2 only)
- Datacast operation
- Using /sys/boot
- Setting the channel map
- Multicast
- Example Boot Script Configurations
- Tuning 2 ATSC channels and streaming to multicast addresses using RTP:
- /tuner0/channelmap us-bcast
- /tuner0/channel 31
- /tuner0/program 3
- /tuner0/target rtp://239.255.1.1:59001
- /tuner1/channelmap us-bcast
- /tuner1/channel 8
- /tuner1/program 1
- /tuner1/target rtp://239.255.1.2:59002
- Tuning 3 digital cable channels using a CableCARD and streaming to multicast addresses using RTP:
- /tuner0/vchannel 702
- /tuner0/target rtp://239.255.1.1:59001
- /tuner1/vchannel 740
- /tuner1/target rtp://239.255.1.2:59002
- /tuner2/vchannel 771
- /tuner1/target rtp://239.255.1.3:59003
- Tuning 2 DVB-T channels in Australia and streaming to multicast addresses using UDP:
- /tuner0/channelmap au-bcast
- /tuner0/channel 5
- /tuner0/program 20121
- /tuner0/target udp://239.255.1.1:59001
- /tuner1/channelmap au-bcast
- /tuner1/channel 44
- /tuner1/program 28753
- /tuner1/target udp://239.255.1.2:59002
- Tuning 2 DVB-C channels in Europe and streaming to a single PC, ignoring rejection messages from the PC due to a closed port:
- /tuner0/channelmap eu-cable
- /tuner0/channel 646
- /tuner0/program 231
- /tuner0/target udp://192.168.0.22:59001 no_clear
- /tuner1/channelmap eu-cable
- /tuner1/channel 770
- /tuner1/program 24112
- /tuner1/target udp://192.168.0.22:59002 no_clear
- HDHomeRun QuickTV (Windows)
- VideoLAN VLC
- TSReader
Setting the channel map
The channel map is a non-volatile configuration option that is used to set the channel to frequency
table, to configure the channel scan table, and to optimize the auto-modulation detection.
GUI: The channel map can be set for each tuner by running HDHomeRun Config (GUI).
Command line: The channel map can be set for each tuner using the following command:
Format: hdhomerun_config <ip|id> set /tuner<n>/channelmap <channelmap>
Example: hdhomerun_config 10001000 set /tuner0/channelmap us-cable
Example: hdhomerun_config 10001000 set /tuner1/channelmap us-cable
Channel maps supported by HDHR-TECH-US hardware:
Name Description Location
us-bcast Digital Antenna (ATSC). US, Canada
us-cable Digital Cable - Normal frequency layout. US, Canada
us-hrc Digital Cable - HRC frequency layout. US, Canada
us-irc Digital Cable - IRC frequency layout. US, Canada
Channel maps supported by HDHR-TECH-EU hardware:
Name Description Location
au-bcast Digital Antenna (Australia). Australia
au-cable Digital Cable (Australia). Australia
eu-bcast Digital Antenna (Europe). Europe, New Zealand
eu-cable Digital Cable (Europe). Europe, New Zealand
tw-bcast Digital Antenna (Taiwan). Taiwan
tw-cable Digital Cable (Taiwan). Taiwan