Instructions

To perform auto search
:• Press and hold 2 seconds on or key, this unit will perform automatic scan
and stop when station catch up.
To perform manual search:
• Press or to adjust the frequency. Use this method to tune to weak or
distant stations that are not strong enough to be recognized by the automatic searching.
Note: One press is 0.05 MHz, the indicator will blinking on display.
e.g: 88.45 MHz
To store a station as a preset:
1. In Radio mode, press or key to adjust the frequency then press
key preset to program number.
2. Display will show “P01” and then press key to store in P01.
You can also select the program number P01 - 20 by pressing key.
.• You can save up to 20 channels in FM band To listen to a preset station
:• In FM mode, press key to recall the preset station.
To turn on or off the stereo sound in FM mode:
• Press key to turn on or off the stereo sound.
Antenna
FM antenna
• Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the
signal is too strong (very close to a transmitter).
USB connection to charge device
USB cable not included.
P.8