Owner`s manual

3. Press and hold WPT for 5 seconds to store your vehicle’s
*HOME* position.
! Display momentarily shows NEW HOME STORED (Fig. 3).
4. Power Multi-Navigator off.
Now walk to Cavern Hot Springs and enjoy the day. After several
hours at the hot springs, you are ready to return to your vehicle.
2.2 -- Finding *HOME*
1. At Cavern Hot Springs power on the Multi-Navigator.
2. Wait for POSITION to be acquired.
3. Press COMPASS button.
! Display will show a bold left or right arrow and the
distance to *HOME*. (Fig. 4)
4. Rotate your body in the direction of the large arrow.
! Keep compass level using the green bubble level.
5. When steering indicator looks like figure 5, you
are facing your vehicle.
6. Begin your return trip to your
vehicle (*HOME*).
! Notice distance decreases
as you approach your
vehicle.
To preserve battery life, sight a distant landmark, in the direction of
your vehicle and turn Multi-Navigator off. Walk to the landmark and press and hold the
COMPASS button while holding the unit level. The compass will point in the direction of
your initial bearing without accessing the GPS system. Sight another landmark, release
the COMPASS button and repeat the process.
Note! -- When you press the COMPASS button with the Multi-Navigator off
the bearing used is based on the last position acquired. To
establish a more accurate bearing power the Multi-Navigator back
on to establish your new position, then press the COMPASS button.
By repeating this process you can use the Multi-Navigator to quickly and easily find your
way back *HOME* from the hot springs.
3 -- Main Functions
Scroll through the 5 main functions (POSITION, ALTITUDE, BAROMETER, TIME/DATE &
GPS NAVIGATION) by pressing the UP or DOWN buttons. A more detailed description of
the functions including side functions, changing units and calibration will be found later
in these instructions.
3.1 -- POSITION
1. Once the Multi-Navigator has located your
position, it is possible to view your location in
latitude and longitude. As you travel, notice the
latitude and longitude values change to indicate
your new position.
2. 3D, 2D, or AQU indicate the status of GPS
positioning.
! AQU -- Looking for satellites, or in the
process of acquiring you position.
! 2D -- 3 satellites are providing two
dimensional position information.
! 3D is the most accurate positioning with 4 or
more satellites providing three dimensional
position information. Accuracy will be better than 10 meters (33 feet).
3
Figure 3
*HOME*
Figure 4
Vehicle
Figure 5
Vehicle
(HOME)
Figure 6
1.
2.