Welcome • Thanks for purchasing this Bullet HD PRO1080P • Please read this instruction manual to ensure correct use of the product prior to use. • Please keep this instruction manual in a safe place. • Please ensure that the sales store fills out the warranty with the date of purchase and the name of the store. • The warranty does not cover any damage that may occur during a sport activity. It is the users responsibility to secure the action cam securely to any sport equipment.
Table of Contents What’s in the box Camcorder Overview Initial Set Up Charging the battery Date & Time Setting MicroSD card Storage Chart Take a Video Take Snapshot Photos Playback on your computer On a Mac Webcam Driver Installation Firmware Installation LED Status Table Repairs Technical Specification Mount Packages Warranty Warning Warranty Card What’s in the box?
1. Camcorder with Sound Cap (water resistant) 2. Camcorder Mount Adapter 3. Universal Mount Adapter 3 pcs 4. Strap Mount for Goggles 3pcs 5. Surf Expansion 6. Self-portrait Mounting 7. Waterproof Cap 8. Rubber O-ring 6pcs 9. Adhesive Mount 8 pcs 10. Adjustable Silicon Straps 2 pcs 11. Battery 2 pcs 12. Hand Safety Strap 13. Charger 14. USB Cable 15. Silicon Grease 16. User Manual Waterproof Cap Use this cap to for water sports! Sound Cap (water resistant) Use this cap to better sound quality.
Strap Mount for Non-vented Helmet / Goggles 3 pcs Goggles Strap with width below 40mm is compatible! Just slide your goggles strap into this mount and you are ready to go. You can use this mount for non-vented helmet too! Surf Expansion Allows quick-release or quickly attached your Bullet HD on to a surfboard. Self-portrait Mounting Allows for positioning of your Bullet HD on the front of your helmet, so you can self-portrait videos and photos.
Battery 2 pcs No need for AA batteries with your Bullet HD. Powered by a rechargeable li-ion battery you’ll get up to 60~90 minutes of continuous recording totally. Hand Safety Strap Charger USB Cable Silicon Grease Using BulletHD for Water Sports Remind you to put some silicon grease to the rubber O-ring from time to time, especially before using underwater. Make sure the rear cap ③ was closed tight.
Bullet HD OVERVIEW ①LED ②Power / Shutter ⑤USB ⑥Plug MicroSD Card Slot ⑦Battery ⑨1080P / 720P Mode Switch ③Rear Cap ④Mode Switch ⑧Microphone ⑩Stabilizer / Firmware INITIAL SET UP 1. Make sure the Bullet HD is OFF before adding or removing the memory card! 2. Screw out the rear cap (open) located at the back of the Bullet HD ③. 3. Install a Micro SD memory card (max up to 32GB) into the rear slot.
Charging the battery Screw out the rear cap located at the rear of the Bullet HD ③ and Plug the USB charger to the Bullet HD. The Green light is on while charging, goes off when the battery is fully charged. On the first use charge the battery 10 hours before use! You can record up to 60~90 minutes with one charge.
Take Snapshot Photos Screw out the rear cap ③, switch ④ to left for photo standby mode, close the cap. Turn on Bullet HD by pressing POWER/Shutter button for 3 seconds. The blue led will be on, then comes to standby mode. Press the shutter button to start taking photos (red led will blink). Press the shooter button ② again to stop. In this mode the Bullet HD will take sequential photos every 3 seconds until the battery die or the Micro SD card is full.
Firmware Installation This is not necessary to install the firmware to view videos or pictures. The firmware is only necessary to install for choosing different settings at 5 / 15 minutes per video file selection; which is available for Windows OS system. 1. Download the latest firmware at www.BulletHD.us - Support – Firmware for PRO1080p into your MicroSD card. 2. Screw the rear cap ③ , install your MicroSD card to BulletHD PRO1080p 3. Switch ⑩ to firmware mode. F = Firmware 4.
Since most helmet cameras are used for recording extreme sports or outdoors activity. Like this and you will probably end up with a broken camera which warranty does not cover any damage that may occur during a sport activity. Check with us before giving up on your BulletHD! http://www.BulletHD.us/repairs/ You might be able to fix your BulletHD even if you think they are broken and beyond hope.
Product size: 104 x 32 x 32 mm Weight: 105g Operating System: OS (USB Drive): Win ME, Win7, 2000, XP, Vista; Mac OS X 10.6+ OS (Webcam): Win7, XP, Vista Mount Packages Mount Package A: 360 Mount for Handlebar / Vented Helmet + Hand Safety Strap Allows you to fit with any standard 29mm handle bar with a 360 degree rotation! Or you can place the mount down or side to fix in different angel too! Flexible & strong adjustable rubber strap, allows you to fix and quick release in your own way.
Mount Package D: Universal Mount Adapter + Camcorder Mount Adapter + Hand Safety Strap + Adjustable Silicon Strap 2 pcs Universal Mount Adapter has a “female” ¼"-20 screw on the bottom to fix with any mounts or tripods that have their own “male” ¼”-20 screw. 2 pieces of flexible & strong adjustable silicon straps are compatible with both strap mount & universal mount adapter, allow you to fix and quick release in anywhere you can think of.
Mount Package G: Flat Surface Mount + Sound Cap + Aluminum Mount Adapter With a magic mat allows your Bullet HD Wearable Camcorder to stick with any flat surface or glass surface. Based by a multi position metal ball, you can shoot at any angel.
Mount Package K: Zinc U-Bolt Mount + Aluminum Mount Adapter + Sound Cap Zinc U-Bolt Mount is ideally suited for several versions of handlebar kits. BulletHD can be quickly and securely mounted. Designed for rugged outdoor use, ideal accessory for mountain bike, motorbike, golf carts, and many others round rail applications. Mount Package L: 6.
Mount Package N: 10cm Rotating Flat Surface Mount + Adhesive Mount + Aluminum Mount Adapter + Sound Cap Mount Package O: Lens x 5pcs + Tool + O-ring x 10pcs + BulletHD Front Cap Break the lens in your extreme sports? Before giving up your BulletHD, you may be able to fix them even you think they are beyond hope. We want to help you get the full value from your BulletHD.
Mount Package Q: BulletHD Front Cap 2 sets + Battery + Bag + 27mm O-ring x 10pcs + Silicon Grease Mount Package R: Wide Angle lens + BulletHD Front Cap + Velvet Cloth+ 27mm O-ring x 10pcs + Silicon Grease This is the time for an extra 135 degree Wide Angle lenses for your sports camera. Camera lenses can help add more creative control.
Mount Package T: Self - portrait Mounting + Surf Expansion + Adhesive Mount 6pcs + Camcorder Mount Adapter + Hand Safety Strap Warranty: As the warranty is included within this instruction manual, please ensure that the store name and date of purchase are filled in. Please read the warranty carefully and keep it in a safe place. This product is covered by a 365 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer.
Subject to technical changes
Let’s do something for our planet!! Please download the drivers & software from our official webpage: www.BulletHD.
