Users Manual Part 1

19 US-EN
for your communication device. Select the entry “SBKP 4 A1“ from
the list of devices detected by your computer or mobile. The second
communication device is connected.
Briefly press button
2
and acoustic signal sounds. The first
communication device is connected again. Now, both communica-
tion devices are connected to the headphones simultaneously.
Clearing paired devices
In paired mode (the LED
7
will briefly flash blue twice every
5 seconds), press and hold button
2
for 3 seconds and
acoustic signal sounds.
The headphones is now in pairing mode. The LED
7
flashes blue
and white.
Press and hold button
2
for 3 seconds and two beeps sound.
The memory in the headphones is cleared. After clearing the
paired memory, it will not automatically connect the device you
used before, need to pair again manually.
Putting on the headphones
The headphones can be adjusted to your head size, if necessary:
the speakers
1
are secured to the band with a rail for this purpose.
Adjust these to ensure optimal comfort.
Please note the marking “L“ (= left) and “R“ (= right) on the inside of
the band immediately above the speakers. Put on the headphones so the
control buttons are on the left.
330138_1904_silv_Bluetooth-Kopfhoerer_content_US.indd 19 27.08.19 10:17