Users Manual Part 1

22 US-EN
– When there is incoming call, the LED
7
will briefly flash blue two
times per second.
– The ringer and the caller‘s voice are rendered through the speakers
1
.
– Music playback is automatically paused when a call is received.
– The microphone
8
records your voice.
– Music continues after the call has been ended.
Note: No headset function while using AUX cable
12
.
Connecting the headphones
through AUX cable
Insert the AUX cable 0.14 in (3.5 mm)
12
into the AUX IN
9
and
other 0.14 in (3.5 mm) jack plug in to the 0.14 in (3.5 mm) jack
connection socket of your playback device.
Start a playlist on your playback device. You can only adjust the
music volume on the playback device.
Note: Music playback via AUX cable takes priority over music
playback via Bluetooth
®
. Music playback from a Bluetooth
®
source is therefore interrupted once the AUX cable
12
is plugged
into the AUX IN
9
.
Cleaning
ATTENTION
Potential damage to the product!
Switch the product off and remove all plugs before cleaning!
Be sure moisture does not enter the product during cleaning to
prevent damage to the product and related repairs.
Only clean the product with a slightly dampened cloth and a mild
spray!
330138_1904_silv_Bluetooth-Kopfhoerer_content_US.indd 22 27.08.19 10:17