User's Manual
15
© 2010 Silver Spring Networks | Company Confidential
Attach IMU Assembly to Meter
• Temporarily fasten the guide pins
to the meter (3-4 threads into
the meter). You will remove
these in a later step.
• Using the guide pins, align the
IMU to the meter and match the
meter wriggler to the IMU drive
by adjusting the index test hand.
– On the Rockwell meter, rotate
the magnet to 12 o’clock to
avoid the screw in the index
well.
– Watch (from the side or top) the
IMU drive link to the meter
wriggler.
• On the American meter, the
pin goes into the slot.
• On the Rockwell meter, the
cup fits over the wriggler
(meter gear).