User manual

6. Control board instruction
NOTE:
1. When ILDA DB 25F connector s connection port are free, the lamp will drive
by the inside program, temporality it can control by DMX 512 signal.
2. After connect the ILDA DB 25F, The lamp will change to ILDA connected port
drive mode ,this connection port can receive all the signal of laser perform
software that accord with the ILDA standard, such as LD-2000 of Pangolin
Company.
4
POWER INPUT Input power, with inner fuse.
DMX IN/OUT DMX signal input/output
POWER ON/OFF Power switch
1
2
4
5
Security key switch Laser diode ON/OFF
3
Remote Lock In the event of removal, laser will not emit any beam.(E.U. IEC regulation)
th th
ADDRESS: the 10 code is switch code. When the 10 code is OFF, 1~9 are
th
function codes. When the 10 code is ON,1~9 will be DMX address codes.
The address code of first light usually by 1, the second light is 14 and so on.
ILDA DB 25 F Connector: signal input connection port of the laser perform
software that in accordance with the ILDA standard.
7
6
ADDRESS
ILDADB-25F Connector-IN
ILDADB-25F Connector-OUT
ON
OFF
Security
key switch
ON
OFF
IN DMX OU T
POWER INPUT
Remote Lock
6
7
4
1
2
3
5
BINARY
USAGE OF DIP SWITCH
1 2 3 4 5 6 7 8 9 10
OFF
ON
0
14
511
LSB
MSB
1 2 3 4 5 6 7 8 9 10
OFF
ON
1 2 3 4 5 6 7 8 9 10
OFF
ON
1 2 3 4 5 6 7 8 9 10
OFF
ON
1
DMX address code setting:
in the binary, each digit have 0 or 1 just correspond to OFF or ON
switch situation.
Example for DMX address code:
DECIMAL