Operation Manual

49
Cleaning the sewing machine surface
If the surface of the sewing machine is dirty, lightly soak a cloth in mild detergent, squeeze it out firmly
and then wipe the surface. After cleaning it once in this way, wipe the surface again with a dry cloth.
Attention: This machine is equipped with a 100mW LED lamp. If lamp replacement is needed, please
contact nearest authorized retailer.
Cleaning the hook
If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of the
machine. Check regularly and clean the stitching mechanism when necessary.
Attention: Disconnect the machine from the wall outlet before carrying out any maintenance.
Maintenance
Attention: Disconnect the power cord from the wall socket before cleaning the screen and sewing
machine surface, otherwise injury or electrical shock may result.
If the front panel is dirty, wipe it gently with a
soft, dry cloth.
Do not use any organic solvents or detergents.
Cleaning the screen
Clean the bobbin holder with a brush.
Remove the needle plate cover and bobbin.