Operation Manual

8. Cut the center of the buttonhole being

careful not to cut any stitches on either

side. Use a pin as a stopper at the

bartack so you do not cut too much.

When sewing buttonholes on stretch fabric, hook heavy thread or cord under the

buttonhole foot.

1. Attach the buttonhole foot and hook the

gimp thread onto the back of the presser

foot. Bring the two gimp thread ends to

the front of the foot and insert them into

the grooves, then temporarily tie them

there. Lower the presser foot and start

sewing.

Set the stitch width to match the diameter

of the gimp thread.

2. Once sewing is completed, pull the gimp

thread gently to remove any slack, then

trim off any excess.

Please Note: It is suggested that you use interfacing on the backside of the fabric.

Making a buttonhole on stretch fabrics

NOTE

Make no

gap here

BUTTONHOLE STITCHING

Downloaded from www.Manualslib.com manuals search engine