Operation Manual

It is easier to guide the fabric and you have a

better view of the seam when using the

standard, regular foot on your machine.

Your sewing machine offers excellent stitch

quality on a wide range of fabrics from

delicate chiffons to multiple layers of denim.

Please Note: Always try to sew first without the walking foot

accessory which should be used only when necessary.

The Walking Foot accessory equalizes the

feeding of the upper and lower layers of

fabric and improves the matching of plaids,

stripes and patterns. It also helps to prevent

uneven feeding of very difficult fabrics.

1. Lift the presser foot lifter to raise the

presser foot bar.

2. Remove the presser foot holder by

unscrewing (counterclockwise) the

presser bar attaching screw.

3. Attach the Walking Foot to the machine

as follows:

- The arm (a) should fit into above the

needle screw and clamp (b).

- Slide the plastic attaching head (c) from

your left to right so that it is fitted into

the presser foot bar.

- Lower the presser foot bar.

- Replace and tighten (clockwise) the

presser bar attaching screw.

- Make sure both the needle screw and

the presser bar attaching screw are

tightly secured.

4. Draw the bobbin thread up and place both

the bobbin thread and the needle thread

behind the walking foot attachment.

* The walking foot accessory is optional. It is not included

with this machine.

ALKING FOOT (Optional)W

Downloaded from www.Manualslib.com manuals search engine