Operation Manual

English

Pairing with the USB Adapter

In the same way than for the stereo adapter and the headphones, the USB adapter and the

headphones have to be paired the first time you want to establish a connection. When pairing

with the USB adapter, two connections can be established: an audio connection to listen to the

music played back on the computer and a headset connection to use the VoIP functions on

the computer (Internet phone).

You may setup both connections, but you can only use one connection at a time. The installed

software gives you a comfortable access to both connections. On the headphones you can

adjust the already explained settings.

Moving the main switch into "On" position

First toggle the main switch (6) to turn the

Bluetooth stereo headphones on. You will find it on

the right-hand earpiece that also contains the

microphone. Move the switch to the "On" position

to turn the power on. The blue indicator on the right

earpiece starts blinking to indicate that the device

is ready.

Main power switch

Blue indicator

Red indicator