Operation Manual

SilverCrest Stereo Hi-Fi System CM-3500
English - 27
Sound Settings
The Micro Stereo Hifi system supports different sound effects. These can also
be combined.
A chosen sound effect applies to all operating modes and will remain valid
even after switching the unit to standby mode.
EQ Setting
The equalizer features four preset options. The selected option is indicated on
the display (3). “FLAT” indicates that the equalizer has been disabled.
Equalizer adjustment is possible via the remote control only.
 Press the EQ button (38) multiple times to toggle between the different
equalizer presets CLASSIC, ROCK, POP, JAZZ and FLAT.
Surround
The Surround function simulates a 3D sound that can normally be heard with a
larger number of speakers only. The selected Surround option is indicated by
the letters “SURROUND“ on the display (3). Setting up the Surround function
is possible via the remote control only.
 Press the SURROUND button (48) to enable surround sound. “SURR ON”
is shown for a few seconds on the display (3).
 Press the SURROUND button again to disable surround sound. “SURR
OFF” is shown for a few seconds on the display (3).
X-Bass
The X-Bass function accentuates the lower frequencies (bass) of music. The
selected X-Bass option is indicated by the letters “X-BASS“ on the display (3).
Setting up the X-Bass function is possible via the remote control only.
 Press the X-BASS button (49) to enable bass accentuation. “BASS ON” is
shown for a few seconds on the display (3).
 Press the X-BASS button again to disable bass accentuation. “BASS OFF”
is shown for a few seconds on the display (3).