Operation Manual

English SilverCrest DS-1020T
16
3
Insert the memory card with the contacts
towards the front side of the camera into
the card compartment and push it into the
housing. The memory card clicks into
place.
4
Close the battery compartment cover by
pressing down the cover flap onto the
housing of the camera.
5
Slide the lock outwards until it locks in
place. Now the battery compartment is
locked.
To remove the memory card, open the battery compartment cover and gently
press on the inserted card. This will protrude a little so that you can get a
hold of it and remove it.
If the memory card or the internal memory is exhausted, the
message Memory full will appear on the display [10], and a
triple sound can be heard.