Operation Manual

Connecting machine to power source

Polarized attachment plug

Conductor intended

to be grounded

Connect the machine to a power source as illustrated. (1)

This appliance is equipped with a polarized plug which must

be used with the appropriate polarized outlet. (2)

Unplug power cord when machine is not in use.

The foot control pedal regulates the sewing speed. (3)

Consult a qualified electrician if in doubt of how to connect

machine to power source.

Unplug power cord when machine is not in use.

The foot control must be used with the appliance by KD-

1902 (110-120V area)/ KD-2902 (220-240V area)

manufactured by ZHEJIANG FOUNDER MOTOR

CORPORATION LTD. (China)

4C-326G(230V area) manufactured by Wakaho Electric Ind.

Co., Ltd. (Vietnam)

Press main switch (A) to " l " for power and light.

For appliance with a polarized plug (one blade is wider than

the other). To reduce the risk of electric shock, this plug is

intended to fit in a polarized outlet only one way. If it does

not fit fully in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician to install the proper outlet.

Do not modify the plug in any way.

Attention:

Foot control

Attention:

Sewing light

IMPORTANT NOTICE