Operation Manual

General functions
Key lock
In order to prevent changing the settings unintentionally by touching the
buttons, you can activate the key lock.
• With the radio switched on, press and hold the button
MEM for about
3 seconds. On screen, the message flashes. All buttons, except
the buttons
SNOOZE and MEM, are now blocked.
• Press and hold down the
MEM button again for about 3 seconds to
cancel the key lock. The message on the screen disappears.
Screen lighting
• Press any button to illuminate the screen. The screen will remain lit for
about 15 seconds.
Stand
• Fold out the base on the rear of the device to make the device
more stable.
Time functions
When the power supply is effective (mains or battery operation), the device
launches with an automatic update.
"SYSTEM SETTING PLEASE WAIT" appears in the display.
When an RDS signal is received, the time and date are adjusted automa-
tically. When it is finished, the current time and the temperature will then be
indicated in the display.
If the time is not adjusted automatically, make the settings manually,
as explained in the following sections.
- 108 -
IB_KH2032_53141_LB5 27.07.2010 14:06 Uhr Seite 108