Operation Manual

Switch Automatic Update (RDS) On/Off
With this function the device can automatically update the settings for date
and time from the RDS signal.
• Press the button
MODE nine times. In the display the indication UPDA ON
appears.
• Press the button
DOWN to switch the automatic update off.
• Press the button
UP to switch the automatic update back on.
Select display mode
You can select which information is shown on the screen when the radio is
switched off.
The selected mode is indicated by a corresponding symbol on the screen.
When the radio is switched off, select the display mode by repeatedly
pressing the
FINE button in accordance with the following table:
Symbol on the screen display mode
CLK only the time is displayed
CITY The time and world time are shown in succession
DATE The time and date are shown in succession
CIT DAT the time, date and world time are shown in succession
Alarm function
This multi-band radio provides you with two independently adjustable
alarm times, AL1 and AL2. You can programme for both ...
...if the device should sound an alarm on every workday, at the
weekend, the whole week or on a single specific weekday;
...if the alarm should sound with an alarm tone or with the radio.
- 115 -
IB_KH2032_53141_LB5 27.07.2010 14:06 Uhr Seite 115