Operation Manual

- 27 -
Note:
If you wish to be woken by sounds from a CD,
memory card or a USB memory stick, you must
insert the appropriate medium beforehand.
If you wish to be woken by the radio, tune in
to a radio station as described under "Radio
mode".
To be able to carry out the following program-
mings, the device must be in the standby mode.
Programming the mode
1. Press the button TIMER.
The indicator for the mode flashes in the display.
2. With the button FUNCTION select the mode CD,
USB, CARD or TUNER.
Adjusting the volume.
3. Press the button TIMER.
The volume indicator flashes on the display.
4. With the buttons VOLUME+ and VOLUME- select
the desired sound volume.
Setting the switch-on time
5. Press the button TIMER. In the display appears
ON and the hour indicator for the switch-on
time blinks.
6. To set the hour for the switch-on time, press the
buttons
SKIP or SKIP .
7. To save the setting, press the button TIMER once
again. The minute indicator for the switch-on
time now blinks in the display
8. To set the minutes, press the buttons SKIP or
SKIP .
Setting the switch-off time
9. To programme in the hour for the switch-off
time, press the button
TIMER. In the display
appears OFF and the hour indicator blinks.
10.To set the hour, press the buttons SKIP or
SKIP .
11.To save the setting, press the button TIMER once
again. The minute indicator for the switch-off
time blinks in the display.
12.To set the minute, press the buttons SKIP  or
SKIP .
Note:
If the switch-off time is the same as the switch-on
time, the indicator ERROR appears in the next
step.
Saving the settings
13.Press the button TIMER.
The time appears in the display again. Additionally,
a clock symbol indicates that the alarm function is
active.
• Should you wish to deactivate the alarm function,
briefly press the button
TIMER.
• To reactivate the alarm function, press the button
TIMER once again and carry out the steps descri-
bed above to programme in the alarm function.
Activating the sleep function (Sleep)
You can detemine a time after which the micro-system
will switch itself off. You can select a switch-off time
between 10 and 90 minutes.
1. Switch the micro-system on.
2. Press the button SLEEP repeatedly until you have
entered in the desired switch-off time.
In the display the switch-off time and SLEEP is in-
dicated.
3. Each time the button is pressed the switch-off
time is reduced by ten minutes.
To switch the sleep function off, press the button
SLEEP
repeatedly until OFF is indicated in the display.
IB_KH2302_DT42354_LB5 13.01.2009 15:01 Uhr Seite 27