Operation Manual

SilverCrest LCD 24-9 Wide
113
English
Contrast/Brightness
Opens the Contrast and Brightness menu.
Press  (2) and  (3) to select the desired option and
press
to confirm. Then press the  (2) or  (3)
buttons to select the desired value. The Brightness
option will be disabled while DCR is on.
DCR stands for "Dynamic Contrast Ratio“ and offers
optimum contrast by adjusting the display backlight
automatically depending on the picture contents.
The ECO Mode option sets a lower brightness (20%) and
therefore a lower power consumption.
Input Select
Select the signal input port that you have used for
connecting the device to the computer: Analog (VGA) or
Digital (DVI). See page 109 – Connecting the Signal
Cable.
Audio Adjust
Press  (2) and  (3) to select between the Volume
and Mute options. Press
(4) to confirm. Then press the
 (2) or  (3) buttons to select the desired setting.
The option “Volume” allows you to adjust the volume of the
built-in speaker; the option “Mute” lets you disable the sound.
Color Adjust
Choose between the following options:
9,300K: Adds blue to the picture achieving a cooler white.
6,500K: Adds red to the picture achieving a warmer
white.