Operation Manual

SilverCrest LCD 24-9 Wide
123
English
2. Lie a soft cloth on an empty, level table and carefully place the
LCD 24-9 Wide with its front on it.
3. Loosen the monitor socket by carefully pushing the two locks
inwards and pulling the socket towards the bottom (see also
page 122 - Removing the Platform for the Stand).
4. Loosen the four screws located inside the base. You can then
pull the base off downwards.
5. Install the VESA wall mount on the back of the monitor. Follow
the installation instructions that came with your wall mount kit
also.
Note: Keep the base, the socket and the screws in a safe place in
case you need to reassemble the base again.