MTS1610 cordless multimedia keyboard and mouse set Cordless multimedia keyboard and mouse set MTS 1610 1 3 2 4 Package contents 1 2 3 4 5 6 7 Cordless keyboard Cordless optical mouse Receiver USB-PS/2 adapter Batteries type AAA, 1.
MTS1610 cordless multimedia keyboard and mouse set Contents PACKAGE CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS 3 Operating environment Cables Maintenance and care Children Intended normal use Batteries Radio interface Conformity Disposal of old devices 3 3 4 4 4 4 5 6 6 INSTALLING THE HARDWARE 7 Insert the batteries Connect the radio receiver to the computer Synchronizing the devices 7 8 10 INSTALLING THE SOFTWARE 11 The symbols in the taskbar 13 THE CONFIGURATION 13 Configuring the optical m
MTS1610 cordless multimedia keyboard and mouse set Important safety instructions Before using the device for the first time, please carefully read through the following instructions and note all warnings, even if you are familiar with handling electronic equipment. Store this manual in a safe place for future reference. If you sell or give away the device, please ensure you handover these instructions too.
MTS1610 cordless multimedia keyboard and mouse set Maintenance and care Maintenance work is necessary if the device has been damaged, if liquid or objects have got inside the housing, if the device has been exposed to rain or moisture or if it is not working properly or has been dropped. Switch the device off immediately if you see a build up of smoke, hear unusual sounds or smell unusual odours. In these cases you must not continue to use the device until it has been checked over by a qualified person.
MTS1610 cordless multimedia keyboard and mouse set batteries (old (used) and new, alkali and carbon, etc.). Remove the batteries if you are not going to be using the device for a lengthy period. Risk of explosion and leakage in the event of improper use. Actively think about protecting the environment. Used batteries do not belong in domestic waste. They must be submitted to a collection service for waste batteries.
MTS1610 cordless multimedia keyboard and mouse set Conformity The wireless mouse & keyboard set has been tested and approved with respect to compliance with the basic requirements and other relevant regulations of the EMC Directive 89/336/EEC, the Directive for low voltage electrical equipment 73/23/EEC and the R&TTE Directive 99/5/EC. Disposal of old devices Devices marked with this symbol are subject to the European Directive 2002/96/EC.
MTS1610 cordless multimedia keyboard and mouse set Installing the hardware Insert the batteries First, insert the batteries in the mouse and keyboard, as shown in the illustrations below. Ensure the batteries are inserted in the devices with the correct polarisation (note the + and – positions).
MTS1610 cordless multimedia keyboard and mouse set Connect the radio receiver to the computer Connect with the USB port: Plug the USB connector of the radio receiver into a free USB socket of your switched on computer. The PS/2 connector (green) must not be connected via USB. The operating system recognises the new USB device and automatically installs the suitable drivers.
MTS1610 cordless multimedia keyboard and mouse set Connect with the PS/2 port: Ensure your computer is switched off. Plug the USB-PS/2 adapter (violet) into the USB connector of the radio receiver, then connect the PS/2 connector of the radio receiver with the PS/2 mouse port of your computer and the attached adapter with the PS/2 keyboard port of your computer. The PS/2 ports are marked with colours on many computers (green = mouse connection, violet = keyboard connection).
MTS1610 cordless multimedia keyboard and mouse set Synchronizing the devices The keyboard and mouse set is connected to the receiver by means of radio transmission. The radio channel must be synchronized the first time you startup the mouse and keyboard and after each battery change. To do this, position the mouse and keyboard in the immediate vicinity of the radio receiver. 1. Press the synchronizer button on the radio receiver. 2.
MTS1610 cordless multimedia keyboard and mouse set Installing the software In order to use the full range of functions of your mouse and keyboard set you must install the supplied software. Please insert the enclosed CD ROM in the CD ROM drive of your computers. The installation process (see figure below) should start automatically. If this window does not appear automatically, double-click the "autorun.exe" file on the CD ROM to start it manually.
MTS1610 cordless multimedia keyboard and mouse set Click "Next" to start the installation. Here you can select the target folder for the installation using the "Browse …“ button or use the suggested folder. Please click "Next" to continue. The installation is finished. Set the selection to "Yes, restart computer now" and click "Finish". Your computer then reboots. As soon as your computer has restarted you can use the software to configure the optical mouse and keyboard.
MTS1610 cordless multimedia keyboard and mouse set The symbols in the taskbar Double-click this symbol to open the configuration menu for the optical mouse (see description below). Double-click this symbol to open the configuration menu for the keyboard (see description on page 14). This symbol shows you that the "Num Lock" function on your keyboard has been activated. Press the "Num Lock" key again to deactivate this function.
MTS1610 cordless multimedia keyboard and mouse set You can activate changes by clicking the "Apply" button (the window remains open) or the "OK" button (the window closes). Use the slide switch to adjust the double-click speed. If you move the slider to the left and activate the function with the "Apply" button the mouse responds with a low double-click speed. If you move the slider to the right you must execute the double-click faster.
MTS1610 cordless multimedia keyboard and mouse set Configuring the keyboard The cordless keyboard of the keyboard and mouse set has 16 fast-access keys (hotkeys) and a volume controller. After you have installed the software the hotkeys are assigned these standard settings: Left-hand side (Internet hotkeys) 1 2 3 4 5 6 7 8 Homepage of your standard browser (e.g.
MTS1610 cordless multimedia keyboard and mouse set Several hotkeys can be individually programmed. Double-click this symbol in the task bar to open the configuration menu for the keyboard. In this menu you can define the function of the hotkeys. Some keys have unchangeable system functions, therefore not all the special keyboard keys are displayed here. Left-click the symbol corresponding to the special key to be changed.
MTS1610 cordless multimedia keyboard and mouse set Appendix Problem solving Please check the following if the keyboard and mouse are not recognised after installation or do not respond to inputs: ; Check whether the batteries or rechargeable batteries have been correctly inserted with the right arrangement (correct polarisation). ; Check whether the receiver is properly connected to the computer ; ; ; ; ; ; (see page 8 onwards – Connecting the radio receiver to the computer). Try another USB port.
MTS1610 cordless multimedia keyboard and mouse set Technical Specifications 27 MHz radio frequency Operating temperature: 5°C - 40°C Humidity: max. 90% relative humidity Optical mouse 5 buttons with scrollwheel 1 connection button Optical sensor 800 dpi optical resolution Radio range: approx 1.2 m Keyboard Standard keyboard layout with 105 keys 1 radio channel (27MHz) with 256 IDs 16 hotkeys (of which 10 are freely programmable) Volume control (+/-) 1 connection button Radio range: approx 1.
MTS1610 cordless multimedia keyboard and mouse set Details of Guarantee English - 19
MTS1610 cordless multimedia keyboard and mouse set 20 - English
