Operation Manual

MTS1610 cordless multimedia keyboard and mouse set
10 - English
Synchronizing the devices
The keyboard and mouse set is connected to the receiver by means of
radio transmission. The radio channel must be synchronized the first time
you startup the mouse and keyboard and after each battery change. To do
this, position the mouse and keyboard in the immediate vicinity of the radio
receiver.
1. Press the synchronizer button on the radio receiver.
2. Press the synchronizer button (figure page 7) on the underside
of the keyboard. Take care not to put down the keyboard so it
is resting on its top (keyboard side down) to avoid pressing
keys.
3. Press the synchronizer button (figure page 7) on the underside
of the mouse.
Synchronizer button
Ensure you carry out the synchronizing procedure in the correct order
within 25 seconds.
If the mouse or keyboard are now used the indicator light of the radio
receiver flashes as a sign that it is receiving radio signals. If the devices do
not work properly after the initial synchronization please repeat steps
1 to 3.
If you replace the batteries in the keyboard or mouse you must repeat the
radio synchronization.
i