Operating instructions
17
Handling and operation
SAB 160 A1
GB
TAVOL - Volume for traffi c radio
Turn the multi controller to set the volume level, with which traffi c reports are ♦
to be played back.
EON - Inf
ormation from other stations
When the EON function is switched on the radio switches to traffi c radio or PTY
groups if the TA or PTY function has been activated.
Turn the multi controller in order to switch the EON function on (EON ON) ♦
or off (EON OFF).
DSP - Eq
ualizer (Digit
al Sound Processing)
Turn the multi controller to select one of the settings ♦ CLASSICS, ROC
K M,
POP M, FLAT or DSP NONE. In the setting DSP NONE no DSP is
switched on. The DSP equalizer setting is shown to the right in the display.
TA - Traffi c Announcement (traffi c radio)
Turn the multi controller to perform the following settings: ♦
TA SEEK: As soon as the reception signal for traffi c announcements
becomes
weaker or you leave the reception area the search function starts and will look
for the strongest TA station.
TA ALARM: As soon as the reception signal for traffi c announcements becomes
weaker or you leave the reception area an alarm tone sounds.
PI - Program Identifi cation (Sound with the station search)
The programme identifi cation code (PI) is a built-in transmission identifi cation
code, which is used for, among other things, the search of alternative frequencies.
It consists of a 16 bit rate which allows for a positive identifi cation of the station.
Turn the multi controller to perform the following settings: ♦
PI SOUND: Station search with sound.
PI MUTE: Station sear
ch without sound.
RETUNE (Searc
h times of stations with PI recognition)
Turn the multi controller to perform the following settings: ♦
RETUNE L: The search process for a station with the correct PI recognition runs
for 90 seconds.
RETUNE S: The sear
ch pr
ocess for a station with the correct PI recognition runs
for 30 seconds.