Operation Manual

136
SAR 28 A1
GB
Defect Possible cause Rectifi cation
The device on
the USB port is
not working
The USB port is intended for
devices working in accord-
ance with the USB standard.
Not all devices available on
the marketplace conform to
this standard. It is a possibil-
ity that a device not working
in accordance with the USB
standard is connected.
Connect a device that works in accord-
ance with the USB standard. Check that
the data carrier is formatted with the
FAT32 fi le system.
The card reader
cannot read the
card
The card may be defective,
dirty or not properly inserted.
Check the card. Slide it in with the let-
tered side pointing upwards. Check that
the data carrier is formatted with the
FAT32 fi le system.
NOTE
►
Please contact Customer Service (see warranty card) if you are unable to
resolve the problem with any of the above actions.
Appendix
Technical details
General
Input voltage 12 V DC
Input current max. 7.5 A
Rated power 4 x 7 W
Operating temperature +5 - +40 °C
Storage temperature 0 - +50 °C
Humidity (no condensation) ≤ 75 %
Dimensions (L x W x H): 18.6 x 12.7 x 5.7 cm
Weight including accessories approx. 650 g
Device fuse
Automotive blade type fuse
7.5 A
IB_42775_SAR28A1_LB1.indb 136IB_42775_SAR28A1_LB1.indb 136 22.10.13 16:0722.10.13 16:07