Operation Manual

SilverCrest SBB 850 D1
16 - English
programmings can be stored by the automatic bread maker. You can go through the individual pre-
sets by pressing the button as soon as you are in programme 16. The preset is indicated on the
display in programme 16 (arrow).
Proceed as follows:
 Press the programme button to select programme 16. The display indicates the preset
programme time.
 Use the button to select one of the eight presets, for example, number 5. The display
indicates the current programme time (without keeping warm).
 Now press the button to go to the first programme step (preheating). The current set time for
this programme step flashes on the display . In addition, the small arrow on the edge of the
display indicates the current programme step.
 Change the time according to your needs using the timer buttons . For the setting
range for each programme step, see section 17 "Programme sequence".
 After entering the desired time, press the button again. The set value is saved and the current
set time for the next programme step flashes on the display .
 Proceed with all programme steps in the same manner as described above and confirm your
entry in each case by pressing the button .
 After you have confirmed the last entry with the button , the display shows the updated
total time of the programme (without keeping warm).
Starting a preset programme
To start a preset programme, proceed as follows:
 Press the programme button to select programme 16. The display indicates the
programme time.
 Use the button to select one of the eight presets, for example, number 5. The display
indicates the set programme time (without keeping warm).
Press the start/stop button . The power LED lights up and the programme starts.
Note about adding ingredients:
For programmes 1, 2, 3, 4, 5, 6, 10 and 16, you can add other ingredients such as
nuts, seeds or fruit while the programme is running. When a beep sounds and "ADD"
is indicated on the display , add the desired ingredients.