Operation Manual

SilverCrest SCA 5.00 A2
150 - English
Macro Mode
This device features a macro function allowing you to focus on very close subjects.
This allows you to position the lens as close as 20-21 cm (7-8 inches) from the
subject. The macro switch (19) is located on the top panel of the device.
Slide the switch to the left to enable the macro mode. Slide the switch to the right
to disable the macro mode.
While the macro mode is enabled, the
icon will appear on the display.
The zoom for enlarging or reducing the scene area does not
work in Macro mode.
Exposure Compensation
During video and photo recording you can set an exposure compensation value.
1. While in video recording or photo capture mode (icons
and ), tap on
the  or  display icons to set an exposure compensation value.
If the picture is too bright you can set a negative value for exposure
compensation.
If the picture is too dark you can set a positive value for exposure
compensation.
Capturing Pictures
1. Open the display and then rotate it according to your needs. The device
powers on automatically.
2. If the current mode is not set to photo capturing, select it by using the mode
selector (6).
3. Point the device towards the desired scene by using the display.