Operation Manual

SilverCrest SCA 5.00 A2
170 - English
Setup Menu
The setup menu contains basic settings for your camcorder. These include date and
time, the button beep, the automatic power-off delay time (power-saving function),
the TV system for direct display on a TV set, a formatting function for the internal
memory or the inserted SD memory card, a function for restoring the factory
defaults, menu language setting, and setting the mains frequency for avoiding
picture interference.
1. Open the display and then rotate it according to your needs. The device
powers on automatically.
2. Press the mode selector button (6) twice to display the setup menu.
The menu offers 8 functions that you can select by using the navigation buttons
(10).
3. Use the navigation buttons (10) to select one of the settings and then press the
confirmation button (7) to confirm.
4. Use the navigation buttons (10) to adjust one of the possible values and press
the confirmation button (7) to confirm.
In the following we describe the available options:
Date / Time
Set the date and time (see also page 146 – Setting the Date and Time).
Beep
Here you can determine if a sound is output when pressing any button. This option
enables or disables the power-on sound at the same time.
Auto PowerOff
You can have the device power off automatically after a certain time to save
battery power. If no operation is performed during the preset time, the device will
power off. To power the camcorder back on, press the On/Off button (18).