Operation Manual

SilverCrest SCA 5.00 A2
172 - English
Frequency
Select the mains frequency to avoid any interference caused by fluorescent
lighting. A mains frequency of 50 Hz is used across Europe; in America the mains
uses a frequency of 60 Hz.
Connectors and Ports
Viewing Recordings on a Television Screen
Any recordings that you can view on the camcorder display can also be played
back on a regular TV set. For this, your television set must have an appropriate
Video In connector.
Depending on the connectors available on the TV set, you can use the USB/AV
cable or the HDMI cable. The HDMI cable will provide digital picture and sound
and therefore offers the best quality. The HDMI (9) and USB/AV (8) ports are
located behind a protective cover.
Simply operate the device as usual. For instance, enable the Autoplay (slideshow)
function to view all pictures in sequence (see also page 169 - Autoplay)
Connecting via the HDMI Cable
1. Please make sure that your camcorder is powered off.
2. Open the port cover and insert the smaller connector of the HDMI cable into
the HDMI port (9) of your camcorder (see also page 137 – Rear Panel).
3. Plug the larger connector of the HDMI cable into the HDMI receptacle of your
TV set.