Operation Manual

SilverCrest SCA 5.00 A2
English - 173
4. Select the HDMI signal source corresponding to the above input connectors
on your TV set. If necessary, read the User Manual of your TV set for more
information on how to do this.
5. Press the On/Off button (18) to power the camcorder on. The device display
remains off while the picture will be shown on the TV screen.
While the camcorder is connected to the TV via the HDMI
cable, video recording and photo capture are not available. It
is only possible to play already-recorded content.
Connecting via the USB/AV Cable
1. Please make sure that your camcorder is powered off.
2. Open the port cover and insert the connector of the USB/AV cable into the
USB/AV port (8) of your camcorder (see also page 137 – Rear Panel).
3. Insert the AV connector into the corresponding inputs of your TV set (yellow
connector to VIDEO IN, white connector to AUDIO IN). The USB connector
on the same end of the cable is not needed for this connection type. Please
also consult the User Manual of your TV set for more information.