Operation Manual

SDBS 2400 A1
■ 12 │ GB
│
IE
│
NI
NOTE
► Do not tip or swivel the steam station when the water tank is full. If you
do, water may be discharged from the filler opening.
5) Insert the plug into a mains power socket.
Ironing without steam
NOTE
Always set the temperature control  to the lowest level (min) before switching
the appliance on. The symbols on the temperature control  correspond to
the following settings:
Symbol Material
Temperature
(approx.)
min -
Synthetics 70 - 120 °C
Silk 70 - 120 °C
Wool 100 - 160 °C
( - max)
Cotton/linen 140 - 210 °C
1) Press the On/Off button 0 to turn the appliance on. The indicator lamp
integrated in the On/Off button 0 lights up and the "max" steam indicator
lamp 3 flashes.
2) Rotate the temperature control  to set the required ironing temperature.
3) The heat-up indicator lamp  lights up during heating. As soon as the heat-
up indicator lamp  goes out, the set temperature has been reached and
you can start ironing.
4) Put the iron down on the base station placement area  after ironing. Set
the temperature control  to "min".
5) Press the On/Off button 0 to turn the appliance off. The indicator lamp
integrated in the On/Off button 0 and the "max" steam indicator lamp 3
go out.
6) Pull out the plug from the mains socket.