Operation Manual

│

11 ■

SEKT 400 A1

Cleaning the appliance

♦ Clean the cooking bowl and the surface of the appliance base with a slightly

damp cloth.

♦ Always dry the appliance properly before using it again.

In the event of limescale build-up

If limescale starts building up in the cooking bowl , proceed as follows to remove it.

♦ Fill the measuring cup

one third full with lemon juice. Then ﬁll the measuring cup

up to the MAX marking with water.

♦ Tip this lemon juice solution into the cooking bowl

♦ Plug the mains plug into a suitable wall socket and press the operating switch

to switch the appliance on.

♦ Allow the lemon juice to simmer for about 10 seconds.

♦ Press the operating switch

to switch oﬀ the appliance and pull the plug from

the mains power socket.

♦ Allow the appliance and the lemon juice solution to cool down.

♦ Tip out the lemon juice solution and wipe out the cooking bowl

with a damp cloth.

Cleaning the accessories

♦ Rinse the lid , the cooking insert and the measuring cup in warm water with

a mild detergent. Rinse all the parts oﬀ using clean water.

NOTE

The lid

cooking insert

and measuring cup are dishwasher-safe. If

possible, place the parts in the upper basket and ensure that none of the

parts can get stuck. This may cause them to become deformed.

♦ After cleaning, dry all parts thoroughly before reusing or storing them.

Storage

♦ Allow the appliance to cool down completely before putting it into storage.

♦ Wind the mains cable

in the direction of the arrow around the cable retainer

on the bottom of the unit.

♦ Store the appliance in a dry location.