Operation Manual

87
SFKS 2 A1
GB
Mounting the transmitter
♦ Select a suitable positioning for the sender, close to
your outer door.
♦ Pierce the pre-stamped mounting holes - on the inner
side of the mounting plate  with a pointed object.
♦ Mark the positions for the required drill holes with
the help of the mounting plate  and drill the holes
for the supplied wall plugs . (6mm drill).
♦ Push the wall plugs into the drill holes and screw the
mounting plate onto the wall using the screws 0
(see Fig. 3).
♦ Push the transmitter onto the mounting plate  until
it clicks audibly into place.

0
.
Fig. 3