Operation Manual

SFS 16 C3

│

19 ■

Mounting the transmitter

♦ Select a suitable positioning for the sender, close to

your outer door.

♦ Mark the positions for the required drill holes with the

help of the mounting plate 3 and drill the holes for

the supplied wall plugs 0 (5mm drill).

♦ Push the wall plugs into the drill holes and screw the

mounting plate 3onto the wall using the screws 6.

♦ Push the transmitter onto the mounting plate 3 until it

clicks audibly into place.

NOTE

► Alternatively, you can mount the transmitter onto a

suitable surface using the double-sided adhesive

tape !.